Mermaid and Triton Handle in casted metal

Material and style

• Made of cast iron with machined turned brass insert.
• The pieces are then patina by hand, silver, bronze, gold, black or you own finish on order.
• All oxidations and surface patinas are made by hand, and may vary slightly from one piece to another or possibly on the same piece.
• All parts are delivered with screws with matching patinas and mechanism to international standard (1 clip clamp, 1 Teflon seal, 1 needle screw and allen key and 1 stem standard square 6 mm section and 7.8 cm length, adapter included if necessary).

In addition to the mechanism, with each handle is included a simple and thin washer in order to evenly distribute the weight of the handle on the door.

Installation

Slide the square section bar into the square hole of the handle, force if necessary, be careful, the 2 concave bulges are to be placed so as to receive the needle screw which will then be screwed with an Allen key to secure the assembly; the Teflon seal, then the metal washer or the clean plate if desired, are optional, as is the clip clamp (openable with suitable pliers) . And There you go!

Care

This object does not require any particular maintenance. The object will take over time and during use a natural patina.

Mermaid Size : 18 x 2-3 cm - Protruding : 3,5 cm 
Weight : +/- 430 g / 510 g

Triton Size : 18,5 x 2-3 cm - Protruding : 3,5 cm 
Weight : +/-  510 g